3.To install the DIMM, make sure the retaining clips are in the unlocked position, then align the DIMM’s notched end with the socket’s corresponding end and firmly insert the DIMM into the socket. Finally push the retaining clips inwards to lock the DIMM in place.
4. Replace the cabinet cover.
Installing a Hard Disk Drive
NOTE: Make sure that the jumper setting of the hard disk drive is set to “Master.”(See the hard disk drive’s documentation for information.)
1.Remove the cabinet cover (see previous section).
2.Remove the screw from the hard disk drive bracket and detach the bracket from the cabinet.
3. Fit a hard disk drive to the bracket and secure with four screws.
18
http://www.TYAN.com
