Tyan Computer Transport GS12 Key Press, Prompt, Function, Application Log when an alert occur

KEY PRESS	PROMPT	FUNCTION
	Performance	Upon each succeeding press of the Right arrow, the
Down arrow	List	following appears. Select which value(s) to display
seven (7) times	Configure	under Performance Display (down arrow fifth
		time – see above):
		Do you want to change? (default is Yes)
		CPU Usage
		Memory Load
		Total Memory
		Avail Memory
		NIC1 Traffic
		NIC2 Traffic
		Total HardDisk
		Used HardDisk
	Urgency Alert	Upon each succeeding press of the Right arrow, the
Down arrow		following prompt appear, allowing you to enable
eight (8) times		urgency alert:
		Do you want to change?
		Send Power Down
		Send Event Log (default is No).
		You can check under Program ->
		Administrative Tools -> Event Viewer
		-> Application Log when an alert occur

NOTE: If you press the C (Cancel) button at any time to cancel the configuration, you must go through the entry process for a particular setting again.

44

http://www.TYAN.com