CAUTION: Set this item to disabled before installing an operating system, running Fdisk or Format program, or when
Virus Check Reminder displays the virus check reminder message during system boot up.
System Backup Reminder displays the system back up reminder message during system boot up.
Password on Boot determines if the system will request a password when starting up.
Power Menu
The Power menu contains the power management settings that help save system power.
ACPI Mode Enable enables or disables ACPI (Advanced Configuration Power Interface) – a power management standard used by the operating system.
Power Saving sets the power saving mode.
Standby Timeout sets the timer for the system to enter Standby mode when it has been idle for the set time period.
Resume On Time/Resume Time allows the system to wake up at a specific time.
Power Button Behavior sets the desired system power state when the power button is pressed.
After Power Failure sets the mode of operation if there has been an AC power loss. Power Off causes the system to remain off when power is restored. Power On causes the system to start up when power is restored. Last State causes the system to return to the state it was before power loss.
Monitor Menu
The following items on your system are monitored:
•VCC 5 V (Voltage)
•VCC 2.6 V (Voltage)
•VCC 3.3 V (Voltage)
•VCCP (Voltage)
•Vcore (Voltage)
•CPU Temperature
•Local Temperature (monitor chip)
•System Temperature
54
http://www.TYAN.com
