4.3Setting the Configuration For Linux
Press the corresponding button according to the number of times specified on the following tables, and you will see the corresponding prompt.
NOTE: If you press the C (Cancel) button at any time to cancel the configuration, you must go through the entry process for a particular setting again.
KEY PRESS | PROMPT | FUNCTION |
| Configure | Upon each succeeding press of the Right arrow, the |
Right arrow | Network | following prompt appears, allowing you to configure |
|
| the network: |
|
| NIC Choice (default is First NIC) |
|
| Enable DHCP (default is Yes) |
|
| IP Address |
|
| Netmask |
|
| Gateway |
|
| DNS Server |
|
| Using New Setting |
|
| Press S (Select) to accept. |
|
|
|
| Restart | Upon pressing the Right arrow, the following prompt |
Down arrow |
| appears, allowing you to restart the system: |
once (1) |
| Restart? |
|
| Press S (Select) to restart the system. |
|
|
|
| Shut Down | Upon pressing the Right arrow, the following prompt |
Down arrow |
| appears, allowing you to shutdown the system: |
twice (2) |
| Shutdown? |
|
| Press S (Select) to shutdown the system. |
|
|
|
| Reset Admin | Upon pressing the Right arrow, the following prompt |
Down arrow | Password | appears, allowing you to reset the root password: |
three (3) times |
| Reset Password? |
|
| Press S (Select) to reset the password. |
|
| NOTE: The default root password is password, you |
|
| can modify it by going to |
|
| /etc/lcdscript/reset_admin_password.sh |
|
| For SuSE Linux 8.1, go to |
|
| /etc/lcdscript/passchange |
|
|
|
| Enable SSH | Upon pressing the Right arrow, the following prompt |
Down arrow | Access | appears, allowing you to enable SSH access: |
four (4) times |
| SSH Access On? |
|
| Press S (Select) to enable SSH access. |
|
|
|
45
http://www.TYAN.com
