Tyan Computer B5103G12S2 usr/sbin/config MYKERNEL cd ../../compile/MYKERNEL make depend make

Then save and exit.

/usr/sbin/config MYKERNEL cd ../../compile/MYKERNEL make depend

make

make install vi /etc/rc

Add the line apm -e 1 before the last line exit 0. Then save and exit. Reboot the system.

You can now use the new kernel. Run the command halt -pto shutdown the system completely.

LAN Driver

NOTE: To compile the driver into the kernel, go directly to step 4.

1.Insert the driver CD into the CD drive.

2.Copy the base driver tar file em-1.7.15.tar.gzof the /LAN/Intel/LINUX/ FREEBSD directory to the directory of your choice. For example, use /home/username/em or /usr/local/src/em.

3.Untar/unzip the archive: tar xvfz em-x.x.x.tar.gzThis will create an em-x.x.xdirectory.

4.To create a loadable module, perform the following steps.

a.To compile the module cd em-x.x.x make

b.To install the compiled module in the system directory: make install

c.If you want the driver to load automatically when the system is booted:

1.Follow steps a and b above to compile and install the module

2.Edit /boot/loader.conf and add the following line:

if_em_load=”YES”

5.To compile the driver into the kernel: cd em-x.x.x/src

cp if_em* /usr/src/sys/dev/em

cp Makefile.kernel /usr/src/sys/modules/em/Makefile

Edit the /usr/src/sys/conf/files.i386 file and add the following lines: dev/em/if_em.c optional em

37

http://www.TYAN.com