Tyan Computer Transport GS12 manual Resetting BIOS Setup, Jumper, Definition, Setting, Description

5.2Resetting BIOS Setup

When you want to reset the BIOS configuration, you need to change the jumper setting. See the next figure for jumper location and the table that follow for jumper definition.

CAUTION: Jumpers not described in this section are reserved for factory use only. Do not change the default settings.

Jumper	Definition	Setting	Description
J2	CMOS setting	1-2	Normal (default)
		2-3	Clear CMOS
			To clear the RTC and CMOS RAM, set J2 to 2-3 for
			one second and set it back to 1-2 again.

56

http://www.TYAN.com