Belkin Pre-N section, Back Panel, DSL Line, Ethernet Ports, Reset Button, a. Resetting the Router

Knowing your Router

Back Panel

(9) (8) (7) (6)

����� ��������

����������������������������

6.DSL Line

This port is for connection to your ADSL line. Connect your ADSL line to this port.

7.Ethernet Ports

The Ethernet ports are RJ45, 10/100 auto-negotiation. The ports are labeled 1 through 4. These ports correspond to the numbered LEDs on the front of the Router. Connect your network-enabled computers or any networking devices to one of these ports.

8.Reset Button

The “Reset” button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the Reset button. Use the restore option in instances where you may have forgotten your custom password.

a.Resetting the Router

Push and hold the Reset button for one second then release it. When the Power/Ready light becomes solid again, the reset is complete.

b.Restoring the Factory Defaults

Press and hold the Reset button for 10 seconds then release it. When the Power/Ready light becomes solid again, the restore is complete.

9.Power Plug

Connect the included 15V DC power supply to this inlet. Using the wrong type of power adapter may cause damage to your Router.

1

2

3

4

5

6

7

8

9

10

11

section

5