Manually Configuring your Router
Setting WPA (with radius server) Settings
If your network uses a radius server to distribute keys to the clients, use this setting.
1.From the “Security Mode”
2.For Encryption Technique, select “TKIP” or “AES”. This setting will have to be identical on the clients that you set up
3.Enter the IP address of the radius server into the “Radius Server” fields.
4.Enter the radius key into the “Radius Key” field.
5.Enter the key interval. Key interval is how often the keys are distributed (in packets).
6.Click “Apply Changes” to finish. You must now set all clients to match these settings.
Configuring your Belkin Wireless G Network Cards to Use Security
Please Note: This section provides information on how to configure your Belkin Wireless G Network Cards to use security.
At this point, you should already have your Wireless Router or access point set to use WPA or WEP. In order for you to gain a wireless connection, you will need to set your wireless notebook card and wireless desktop card to use the same security settings.
46
