Troubleshooting
Problem:
The ADSL LED is not on.
Solution:
1.Check the connection between the Router and ADSL line. Make sure the cable from the ADSL line is connected to the port on the Router labeled “DSL Line”.
2. Make sure the Router has power. The Power LED on the front panel should be illuminated.
Problem:
The Internet LED is not on.
Solution:
1.Make sure the cable from the ADSL line is connected to the port on the Router labeled “DSL Line” and the ADSL LED 
is on.
2.Make sure you have the correct VPI/VCI, user name, and password from your ISP provider.
Problem:
My connection type is static IP address. I can’t connect to the Internet.
Solution:
Since your connection type is static IP address, your ISP must assign you the IP address, subnet mask, and gateway address. Instead of using the Wizard, go to “Connection Type”, and then select your connection type. Click “Next”, select “Static IP”, and enter your IP address, subnet mask, and default gateway information.
Problem:
I’ve forgotten or lost my password.
Solution:
Press and hold the “Reset” button on the rear panel for at least 10 seconds to restore the factory defaults.
64
