Belkin Pre-N Running the Setup Wizard, Configuring your Router with the Setup Wizard, section

Configuring your Router with the Setup Wizard

Running the Setup Wizard

1.You can access the web-based management user interface of the Router using the Internet browser on a computer connected to the Router. Type “192.168.2.1” (do not type in anything else such as “http://” or “www”) in your browser’s address bar. Then press the “Enter” key.

Note: It is strongly recommended that you use a computer physically connected to the Router with an RJ45 cable for initial setup. Using a wirelessly connected computer for initial setup is not recommended.

2.The following screen will appear in your browser to prompt you to log in. The default User Name is “Admin” and the default Password is “Admin”. Enter both User Name and Password, then click the “Submit” button to log in. By default there is no username and password required

Note: It is strongly recommended that you change the password to your own for increased security. Please read the following section, entitled “Manually Configuring your Router”, for details on how to change your password and to reference other security features.

1

2

3

4

5

6

7

8

9

10

11

section

19