4.Fit the bracket with a hard disk drive back into place and secure with one screw. If using an Ultra ATA/100 hard disk drive, connect the corresponding end of the included HDD power to pin header cable to the motherboard (Œ) and the other end to the hard disk drive (•) .
Connect the included primary IDE data cable to the primary IDE connector on the motherboard (Œ) and the other end to the hard disk drive (•).
If using a Serial ATA hard disk drive, connect the included Serial ATA data cable to the primary SATA connector on the motherboard and the other end to the hard disk drive (Œ) . Connect the corresponding end of the included HDD power to pin header cable to the motherboard (•) , connect the corresponding end of the Serial ATA power cord to the other end of the HDD power to pin header cable and the other end to the hard disk drive (Ž) .
19
http://www.TYAN.com
