FIGURE 3
MOUNTING INSTRUCTIONS
NOTE: It is recommended that a bead of silicone caulking be placed behind the side mounting flanges and under the top flashing at the time of installation.
MIS-796
FIGURE 3A
ELECTRIC HEAT CLEARANCE
Side section view of supply air duct for wall mounted unit showing 1/4 inch clearance to combustible surfaces.
WARNING
•A minimum of 1/4 inch clearance must be maintained between the supply air duct and combustible materials. This is required for the first 3 feet of ducting.
•It is important to insure that the 1/4 inch minimum spacing is maintained at all points.
•Failure to do this could result in overheating the combustible material and may result in fire.
MIS-277
Manual