![](/images/new-backgrounds/1270111/27011157x1.webp)
Connecting the mains supply cable
oThe mains terminal block is located on the rear of the oven and the terminals are accessible by removing the terminal block cover. You should remove the cover screw to access this.
oThe cable connections must be made in accordance with the diagram below:-
o 1 and 2 are the live connection, 4 and 5 are the neutral connection and the remaining one is the earth connection
marked with the symbol.
oThe brass links must be positioned as marked in the diagram above and once established ALL terminal screws must be tightened down firmly.
oIf when the oven is first switched on, it does not function correctly, you should recheck that the terminal screws are all fully tightened between the links. This should be done before contacting the Customer Care Department.
oIMPORTANT: The appliance must NOT be connected to the mains supply by means of a 13A plug and socket.
oThe cable can be looped if necessary, but make sure that is not kinked or trapped when the oven is in position. Care must be taken to avoid the cable being in contact with hot parts of the appliance.
29