Selecting an automatic wash and dry program
9Activate the pop out program selector knob by depressing it.
9Select the most appropriate wash program for the garments that you are washing, by turning the program selector knob.
oThe LCD display will briefly flash the wash program number that you have selected and then show the approximate time that it will take the chosen wash cycle to complete.
9Select any program options by using the program option button underneath the LCD display (for more information, please refer to the “setting a program option” section).
oAny program option that you select, will affect the length of time that the wash cycle will take to complete. The LCD display will update to reflect this change.
oSelect the drying time in minutes, by using the drying time button.
oThe drying time will appear on the LCD display and will increase each time the drying time button is pressed.
oPress the START/STOP button to get the automatic wash and dry cycle to commence.
oIMPORTANT: If you select a wash and dry program, your wash load must not be over 4kg for NORMAL wash programs and 1.5kg for DELICATE wash programs.
Cancelling or pausing a wash program
9To stop a wash program once a wash cycle is in progress, you should turn the program selection knob.
oThe appliance will go onto PAUSE status and the wash program will be cancelled.
oThe door will remain locked for two minutes before it is possible to open the door and take out the garments.
Before opening the porthole door, you MUST drain the appliance; otherwise there may still be water in the drum when you open the door.
19
