Baxi Potterton 105 HE, 80 HE manual An Emergency, Case of gas leaks, Servicing your Appliance

Gas Tap

Fig. 1

Fig. 2

Heating Flow, Heating Return and

Mains Water Inlet

Isolating Valves

1.0Warnings

1.1In an Emergency

If a water or gas leak occurs or is suspected, the boiler can be isolated at the inlet valves as follows;

1.Turn off the electrical supply and turn the selector switch on the facia box to the OFF position.

2.Using a suitable open ended spanner or screwdriver turn the square on the gas tap to the left to isolate the gas supply at the boiler (Fig. 1).

3.The isolating valves are positioned under the boiler and can be closed by turning their taps to the right towards the wall (Fig. 2).

4.Call your Installer or Service Engineer as soon as possible.

1.2In case of gas leaks

1.If a gas leak is found or suspected, turn off the gas supply at the meter immediately and at the isolating valve on the boiler if possible. Contact your Gas Supplier immediately.

1.3Servicing your Appliance

1.For reasons of safety and economy your appliance should be serviced annually. Servicing must be performed by a competent person. Your Installer or Service Engineer will be able to advise you.

2.Any purpose provided ventilation should be checked periodically to ensure that it is free from obstruction.

1.4Electricity Supply

1.THIS APPLIANCE MUST BE EARTHED.

2.A standard 230V ~ 50Hz supply is required. The appliance must be protected by a 3 amp fuse.

Never Hang Flammable Items Over The Appliance

4