FRYING INSTRUCTIONS (Read page 22 about Cooking Oil)
WARNING
This cooker does not have automatic thermostat controls so must be attended and monitored at all times during use. When cooking with oil/grease, a thermometer must be used to monitor temperature. Oil/grease heated above 400˚F (200˚C) will ignite and catch fire causing property damage, personal injury or death.
NOTE: Optimum frying temperature range is 325˚F to 350˚F (163˚C to 177˚C).
1.Follow instructions to properly assemble and position the cooker. Perform gas leak and thermometer test, and oil level determination. NOTE: If cooking with water or other liquid, use the same process as described.
2.After making certain food product is thawed and towel dried, add food product into the empty basket.
3.Add the determined amount of oil/grease into the cooking vessel (pot).
4.Attach thermometer to the pot making certain the stem is immersed into the oil at least
CAUTION
Before lighting cooker, always have all food product prepared and ready for frying. This will reduce future distractions and better enable proper monitoring of thermometer and heating oil.
5.Light the burner on the cooker as described on page 16. NOTE: Spend a few moments to adjust the flame up and down to become familiar with flame adjustment process.
CAUTION
Thermometer shall be attached to the
6.Reduce burner flame to lowest possible setting and carefully set cooking vessel with oil and thermometer onto the cooker.
7.Increase flame to desired level and monitor the thermometer. When using
WARNING
DO NOT cover cooking vessel with a lid during oil
8.When temperature reaches 325˚F, reduce burner flame to lowest level. Wearing a protective glove, remove thermometer from pot and attach to side of perforated basket with food product already placed inside.
WARNING
Thermometer will become very hot and cause burns if touched by bare hands. Always wear protective gloves or mitts when handling a hot thermometer.
20