SPEAKER CONNECTIONS (BRIDGED)
The EL amplifiers are capable of being bridged in a mono configuration. This feature allows you the flexibility of using the amplifier to drive a ** subwoofer or a center channel. In this configuration the amplifier sums the right and left channel to deliver one channel (mono) output.
Please note: in order for the amplifier to sum right and left signal information, both right and left RCA connections must be made.
**CAUTION! In the bridged mode, the amplifier must see a 4 Ohm load or higher. Any lower than 4 Ohms will cause the amplifier to overheat and possibly cause
POWER
+12V REM GND
SPEAKER
L + 
L - 
R + 
R -
+12V
FUSE
| SPEAKER |
+ CH1 - | + CH2 - + CH4CH3 - |
+ BRIDGED -
+ BRIDGED -
+-
4 Ohm Speaker | + - | + - |
| 4 Ohm Speaker | 4 Ohm Speaker |
CSA50.2 BRIDGED | CSA200.3 BRIDGED |
SPEAKER CONNECTIONS | SPEAKER CONNECTIONS |
|
|
|
| POWER |
|
|
|
|
|
|
| |
GND REM | +12V |
|
| FUSE | ||||||||
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SPEAKER
| + CH1 - |
|
| + CH2 - | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
+ CH3 - | CH4 - | ||||
|
| + | - |
|
|
|
| ||||
4 Ohm Speakers
CSA50.4 BRIDGED SPEAKER CONNECTIONS
11
