BBQ Pro 137.23672310 Step, Soapy Water Test Warnings & Procedures, Assembly, Page, Preparation

SOAPY WATER TEST WARNINGS & PROCEDURES

ASSEMBLY

WARNINGS

ƔSoapy Water Test MUST be performed each time gas cylinder is connected to burner/hose or each time it is used.

ƔSoapy Water Test MUST be performed outdoors in well ventilated area.

ƔWhen performing Soapy Water Test keep smoker away from open fl ames, sparks or lit cigarettes.

ƔSmoker is designed to work with propane gas only. Only use gas cylinders marked propane with this unit. This product will NOT operate with natural gas.

ƔNever use an open fl ame to test for gas leaks.

PREPARATION:

ƔRemove any cookware from smoker.

ƔMake sure regulator and gas cylinder valve to OFF position.

ƔPrepare soapy water solution: (1) part dish washing liquid (or more if desired), (3) parts water.

ƔApply soapy water solution to gas cylinder valve, regulator and hose length up to burner.

TESTING GAS VALVE：

ƔTurn gas cylinder valve ON and watch for bubbles.

DO NOT LEAVE GAS ON MORE THAN 12 SECONDS. If bubbles appear, stop, turn gas cylinder OFF and retighten fi tting. Repeat test.

TESTING REGULATOR AND HOSE:

ƔAFTER gas cylinder valve has passed Soapy Water Test, turn gas cylinder valve ON, open regulator control valve one full turn and check for bubbles at valve location, along full length of hose and at burner connection. DO NOT LEAVE GAS ON MORE THAN 12 SECONDS. If bubbles appear, stop, turn regulator valve OFF, turn gas cylinder OFF and retighten the connection that is leaking gas. If hose is source of leak, STOP, do not use unit. Hose must be replaced.

ƔWhen test is complete, and there are no leaks, wait minimum of 5 minutes for gas fumes to diminish before lighting cooker.

Apply solution to	Apply solution to hose regulator
gas cylinder valve	and the full length of the hose

Apply solution underneath control	Failed test will present bubbles as
panelwhere burner and hose are	shown below.
connected

(Smoker shown on back for clarity only)

DURING ANY PORTION OF SOAPY WATER TEST IF BUBBLES CONTINUE TO APPEAR, STOP, DO NOT USE UNIT. CONTACT LOCAL PROPANE DEALER OR MANUFACTURER CUSTOMER SERVICE 1-888-577-9820.

Note: Use 20LB (9kgs) gas cylinder that has a protective collar with this unit. Cylinder NOT included with this unit.

STEP 4

Attach heat shield (20) to burner box (6) using self tapping screws (B) as shown.

Tighten all hardware at this time.

STEP 5

Mount body handle (8) to smoker body (1) using M6*12 (A) and M6Nut C .

STEP 6

Insert door handle (7) into smoker door (2). Secure using M6*25 (F).

Page 5 customer service 1-888-577-9820 customer service 1-888-577-9820 Page 10