BeefEater manual Operation Of The Optional Side Burner, Lighting, Australia’s Leading Barbecue

Operation Of The Optional Side Burner

Lighting

1.Check the control knob is in the Off position and ensure the gas line is properly connected.

2.Raise the lid and check that the burner and burner cap are in the correct position.

3.Press and turn the control knob slowly (3-4 seconds) in a counter - clockwise direction to the High position until a click is heard. When the burner is alight, select your desired heat setting. A low flame or simmer condition is obtained by turning the control knob anticlockwise to Low.

4.If the burner fails to ignite, turn the control knob to Off, wait 5 minutes and repeat the lighting procedure.

13

Operating Instructions

BeefEater Barbecues

Warning

When using the side burner ensure that any handle fitted to a wok, pot or pan is positioned so that it is out of reach of children.

Warning - Safety With Woks And Pots And Pans

When using a wok, pot or pan on the side burner ensure that any handle is positioned so that it is out of reach of children.

Long handles protruding out beyond the side burner can be dangerous.

Keep children away from the appliance when it is operating. Never leave an operating barbecue unattended.

After Use

1.Turn the control knob to the Off position and turn the gas cylinder valve off when the barbecue is not in use.

2.Clean off any food spills and then close the lid.

High

Low

Off

Always open lid before lighting. Do not close lid while burner is alight.

Long handles protruding out beyond the side burner can be dangerous.

Australia’s Leading Barbecue