5
ULTRABASS BX1200

2. CONTROL ELEMENTS

time, there are effects devices and the desire to create ones
own unique soundwhich can only be achieved with
innovative amplifiers. The unique ULTRABASS BX1200 gives
you pioneering sounds coming from an extremely compact
design.
As technology advances, youve got to keep track of latest
technological breakthroughs to avoid falling by the wayside. Which
is what we did, by continuously improving this Bass Workstation
and including many of your valuable suggestions.
Experience a new-generation Bass Workstation with
fascinating features:
sAstounding sound diversity through filter and sub-harmonics
processor.
sState-of-the-art amplifier technology combined with a built-
in bass cabinet gives you precision in the treble and punch
in the bass range.
sThe high-grade and custom-built 12" aluminum speaker
opens up new dimensions in terms of sound.
sThe rugged and compact design makes the ULTRABASS
your favorite amp for club gigs and rehearsals.
sThe trapezoidal cabinet allows you to use the BX1200 as an
active floor monitor for the bass player in your band.
sPlenty of power plus a built-in DI outputeven on big stages
youll cut a fine figure with your BX1200.

1.1 The design concept

We designed the BX1200 to finally start the world of bass amp
design moving. Your absolutely low-noise and indestructible Bass
Workstation represents the current state of the art.
The robust cabinet is made of high-grade and non-polluting E1-
MDF boards, which are grooved, multi-glued and free of
formaldehydes. This is to make sure that your BX1200 keeps on
working even when the going gets tough.
1.1.1 The DYNAMIZER technology
When it comes to amplifying the signals delivered by electric
instruments, youve got to separate the wheat from the chaff.
Unlike mixed or mastered signals, electric instruments usually
deliver extremely high signal peaks which, when raised in gain,
produce nasty distortion. How an amplifier responds to these
signal peaks can therefore be seen as one of its most essential
quality features.

2. CONTROL ELEMENTS

2.1 Front panel

Fig. 2.1: Front panel control elements
Many manufacturers use limiters preceding the power stage to
limit dynamic signal peaks. However, the problem is the preamp,
which is why weve equipped the BX1200 with our unique
DYNAMIZER preamp circuit that gives you a lively and punchy
sound with signal peakseven if the amp reaches its power
limits. Extreme signal peaks are limited effectively while the
average level and hence the power of the overall signal is raised.
The sound gets more vivid and powerful in character, without
any unmusical distortion. With its opto-limiter in the power stage
it is virtually impossible to overdrive the ULTRABASS BX1200.

1.2 Before you begin

Your BX1200 was carefully packed in the factory and the
packaging is designed to protect the unit from rough handling.
Nevertheless, we recommend that you carefully examine the
packaging and its contents for any signs of physical damage,
which may have occurred during transit.
+If the unit is damaged, please do not return it to
BEHRINGER, but notify your dealer and the shipping
company immediately, otherwise claims for
damage or replacement may not be granted.
Shipping claims must be made by the consignee.
Be sure that there is enough space around the unit for cooling
and please do not place the ULTRABASS on high temperature
devices such as radiators etc. to avoid overheating.
+Before you connect your ULTRABASS to the mains,
please make sure that your local voltage matches
the voltage required by the unit!
The mains connection of the BX1200 is made by using the
enclosed mains cable and a standard IEC receptacle. It meets all
of the international safety certification requirements.
+Please make sure that all units have a proper
ground connection. For your own safety, never
remove or disable the ground connector of the unit
or of the AC power cable.
You will find additional information in chapter 5 INSTALLATION.
WARNING!
+It should be pointed out, that extreme output
volumes may damage your ears and/or your
headphones. Turn down all LEVEL controls before
you switch on the unit. Always pay attention to an
appropriate volume.
These are the inputs for your electric bass guitar. The
ACTIVE jack is for active basses, the PASSIVE jack for
passive instruments with low output levels.
The GAIN 1 control governs the volume of the first channel.
When this channel is active, the LED above the GAIN 1
control lights up.
Press the CHANNEL button to select either of the two
ULTRABASS channels.
The GAIN 2 control sets the volume for the second channel.
When this channel is active, the LED above the GAIN 2
control lights up.