
MIDI
Here the MIDI function is switched on or off. Toggle between ON and OFF with the +/- buttons.
CHANNEL
This field indicates the current MIDI channel. OMNI MODE signifies that MIDI commands from all channels are received.
SND MEMORY DUMP
You can send a MIDI dump using the +/- buttons. The complete memory will be transferred and can be stored externally.
RCV MEMORY DUMP
You can start the reception of a MIDI dump using the +/- buttons. The externally saved data can be reloaded.
CNTL
MIDI control change data can be sent and received. The first controller number is selected using the +/- buttons. The following 64 numbers correspond to the frequencies 20 Hz to 20 kHz and Master. First the left, and then the right channel.
PROG
MIDI program changes can be sent and received. This is chosen by ON and OFF respectively in the display.
EXCL
System exclusive data can be sent and received. This is advantageous for communication with the
3. APPLICATIONS
The open mainframe architecture of the BEHRINGER
3.1 Using the
This will probably be the most common use for the
Fig. 3.1: The
20 | 3. APPLICATIONS |