Behringer DSP8024 user manual Software

ULTRA-CURVE PRO DSP8024

Status Bytes

Program Changes		Pcxx	c = Channel
			xx = Program (0..99)
Controller		Controller Offset adjustable from 0 to 64 *
		Ccxx	c = Channel
			xx = Number
Data Bytes
Contrl.	Parameter		Definition	Range
Number
0-30	EQ Left	20 Hz, 25 Hz, ..., 16 kHz, 20 kHz		0 - 127
31	Master Level Left			0 - 127
32-62	EQ Right	20 Hz, 25 Hz, ..., 16 kHz, 20 kHz		0 - 127
63	Master Level Right			0 - 127

Tab. 7.2: MIDI controller

* You can adjust an offset for the MIDI controller. The MIDI controller will start from the chosen position.

7.4 Software

The ULTRA-CURVE PRO operating software is under continuous development to improve its performance and control, and to keep pace with your expectations and requirements. Therefore you are asked to contact us with your needs, suggestions and ideas. We will make every effort to put your ideas into use in successive software updates. In order to receive a new software update, you must send your ULTRA-CURVE PRO to us. Information about new software versions will be available through music magazines, from your dealer or directly from BEHRINGER (+49 2154 920666).

+The current software version will always be displayed shortly after switching the ULTRA-CURVE PRO on.

7. APPENDIX 33