EUROGRAND
5.6.5 Saving parameter settings
The EUROGRAND allows you to save the changes made to the instrument’s settings, so that they won’t get lost when the unit is powered down. When the save function is not active, all changes made to the settings – except for the music sequencer data – will be lost when you switch the piano off. When switched back on, the EUROGRAND recalls the factory default settings.
The save function can be activated separately for the following groups of functions: sounds, MIDI, tuning and damper pedal.
+Please enter EDIT mode (see chapter 5.1) and select the following function.
>Sounds
You can save the following settings for this group of functions:
=Sounds (see chapter 2.4)
=Layer mode settings (see chapters 4.1 and 5.3)
=Type of room effect and intensity (see chapter 4.2.2)
=Type of modulation effect and intensity (see chapter 4.2.3)
=Key velocity (see chapter 5.6.1)
=Metronome meter and tempo (see chapter 5.4)
=Dimmed volume (see chapter 5.5.5)
Function: | E8.1 |
Value: | ON, OFF |
Description: |
|
OFF: | Save function for sounds is disabled (default |
| setting) |
ON: | Save function for sounds is enabled |
> MIDI |
|
You can save the following settings for this group of functions:
=All MIDI settings (see chapter 6.3.3)
Function: E8.2
Value: | ON, OFF |
Description: |
|
OFF: | Save function for MIDI settings is disabled |
| (default setting) |
ON: | Save function for MIDI settings is enabled |
> Tuning |
|
You can save the following settings for this group of functions:
=Transposition (see chapter 5.2)
=Fine tuning (see chapter 5.6.3)
=Tuning (see chapter 5.6.4)
Function: E8.3
Value: | ON, OFF |
Description: |
|
OFF: | Save function for tuning settings is disabled |
| (default setting) |
ON: | Save function for tuning settings is enabled |
>Soft pedal
You can save the following settings for this group of functions:
=Soft pedal function (see chapter 5.5.8)
=Soft pedal intensity (see chapter 5.6.2)
Function: E8.4
Value: | ON, OFF |
Description: |
|
OFF: | Save function for soft pedal settings is disabled |
| (default setting) |
ON: | Save function for soft pedal settings is enabled |
5.6.6 Restoring the factory default settings
Use the following procedure to recall the factory default set- tings.
+Tip: All saved parameters as well as the music se- quencer data will be lost during either one of the fol- lowing procedures.
1)Use the POWER switch to switch the instrument off (if not already done).
2)Play and hold down the top C key on the keyboard, then switch the EUROGRAND back on.
+ 
An alternative procedure is described below:
1)Use the POWER switch to switch the instrument off (if not already done).
2)Press and hold down the TRACK 1 and TRACK 2 buttons, then switch the EUROGRAND back on.
+
3)Let go of the TRACK buttons after about 5 seconds.
Advanced operation | 17 |