Behringer EG8180 Value:, Description:, Function: E7.8, >Sending music sequencer data

EUROGRAND

>Sending music sequencer data

Use this function to send music sequencer data via the MIDI output of the EUROGRAND. This allows you to archive recorded music pieces on your music computer or hardware MIDI sequencer. This type of transmission is only for system-exclusive data packages (MIDI dump), but not for MIDI playing data.

Function: E7.8

Value: -

Description:

1)Connect the EUROGRAND to a computer or hardware sequencer as described in chapter 6.3.2.

2)Set the MIDI sequencer to reception-ready mode.

3)Select the function E7.8 in EDIT mode.

4)Press the +/YES button to execute the transmission.

When the transmission is complete, the display shows END.

+You can send the data back to the EUROGRAND at a later date. To do this, use the MIDI IN jack to connect the EUROGRAND to the device that received the data before. As soon as you start the transmission from the MIDI sequencer, the EUROGRAND will automatically receive the data. Make sure that neither DEMO, EDIT or music sequencer mode is active!

Connection to external equipment

21

Contents

Page Important Safety Instructions Caution Table of Contents 1. Introduction 1.1Before you get started 1.1.1 Shipment 1.1.2 Initial operation 1.1.3 Online registration Page 3.Control elements and connections 3.1Control panel 3.2 Connectors 3.3 Foot pedals 3.4Power supply 4.Basic operation 4.1Using two sounds (layer mode) 4.2 Changing the sound character 4.2.1Brightness equalizer 4.2.2 Room effects 4.2.3 Modulation effects 4.3 Using the pedals 5.Advanced operation 5.1Using EDIT mode 5.1.1 Quick access to layer mode functions 5.2 Transposition 5.3Layer mode settings 5.3.1 Volume ratio 5.3.2 Detune 5.3.3 Transposition 5.4 Using the metronome 5.4.1Metronome volume 5.5 Music sequencer 5.5.1 Recording pieces of music 5.5.2Editing pieces of music 5.5.3 Playing back pieces of music 5.5.4 Repeating musical passages for practicing 5.5.5Setting the volume of muted tracks 5.5.6Editing the music sequencer settings 5.5.7 Sync start 5.5.8Start the music sequencer with foot pedal 5.6 System settings 5.6.1 Key velocity 5.6.2 Soft pedal intensity 5.6.3 Fine tuning 5.6.4 Tunings 5.6.5 Saving parameter settings 5.6.6 Restoring the factory default settings 6.Connection to external equipment Page Page Page 7. Troubleshooting 8. Speciﬁcations 9.Appendix 9.1Cables 9.1.1 Unbalanced 1/4" cable 9.1.2RCA cables 9.1.31/4" to RCA cable 9.2Presets on the EUROGRAND 9.3List of demo music pieces included 9.4 MIDI implementation chart 9.5 EDIT parameters 10. Warranty EG2180-BK/EG8180-BK/EG8180-RD 18912 North Creek Parkway Suite 200 Bothell, WA 98011 USA Phone: +1 425 672