12XENYX QX2222USB/QX1622USB

XENYX QX2222USB/QX1622USB Controls

13Quick Start Guide

(EN) Step 2: Controls

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(13)

(14)

(15)

(16)

(17)

 

(18)

(19)

 

(20)

 

(21)

(22)

(1)USB wireless input accepts a USB receiver for use with BEHRINGER ULM wireless microphones.

(2)GAIN knob adjusts the sensitivity of the MIC and/or LINE inputs.

(3)COMP knob adjusts the amount of compression effect on the channel.

(4)EQ knobs adjust the high, mid and low frequencies of the channel. Adjust the FREQ knob to select the specific frequency adjusted by the MID knob.

(5)AUX knobs adjust how much of the channel’s signal routes to the AUX SEND jacks.

Press the PRE button when routing the signal to a stage monitor. Use the FX knob to send the channel’s signal to the internal multi-FX processor.

(6)PAN/BAL knob positions the channel in the stereo field.

(7)MUTE button mutes the channel.

(8)CLIP LED lights when the channel signal overloads.

(9)CHANNEL FADER adjusts the channel volume.

(13)

MULTI-FX PROCESSOR adds a selected sound

 

effect to any channels whose FX knob is

 

turned up. See the Multi-FX Processor section

 

for details.

(14)

AUX SENDS adjust the amount of signal

 

sent to a monitor speaker or external effects

 

processor via the AUX SEND jacks.

(15)

AUX RETURNS adjust the amount of signal

 

returning from an external effects processor

 

that is included in the main mix. Use the

 

TO AUX SEND knob(s) to include the effects

 

signal in your monitor mix as well.

(16)

SOURCE buttons route the USB/2-TR, SUB,

 

and MAIN MIX to the PHONES and CONTROL

 

ROOM jacks.

(17)

USB/2-TR TO MAIN button routes the

 

USB and 2-TRACK signal to the MAIN MIX.

(18)

PHONES/CTRL ROOM knob adjusts the

 

headphone or studio monitor volume.

(19)

VU METER displays the MAIN OUTPUT

 

signal level.

(20)

MODE button determines whether

 

the channel’s SOLO button operates as

 

‘Solo in Place’ (button out) or ‘Pre-Fader

 

Listen’ (button in). PFL is preferred for gain

 

setting purposes.

(21)

SUB faders adjust the output of the

 

SUB OUTPUT jacks. Use the LEFT/RIGHT

(9)

(10) (11) (12)

(10)AC IN accepts the included power cable for connection to a mains outlet.

(11)POWER ON switch turns the mixer on and off.

(12)PHANTOM ON switch sends 48 V to the XLR inputs for use with condenser microphones.

buttons to assign the SUB signal to the left

and/or right MAIN MIX.

(22) MAIN MIX faders adjust the overall output of

the mixer.