EURORACK UB1002FX/UB1202FX

FOREWORD

Dear Customer,

I’m sure you’re one of those people who have devoted themselves body and soul to your chosen area and no doubt this has trans- formed you into an expert in your field!

Well, for over 30 years, my passion has been music and electronics. This not only led me to establish BEHRINGER, but also enabled me to convey and share my enthusiasm with my employees.

During all the years that I’ve been involved with studio technology and end users, I have developed a feel for the

things that really count, such as sound quality, reliability and ease of use. What’s more, I have always had the desire to push the boundaries of technical possibilities to the extreme.

It was precisely this motivation that prompted me to start work on a new series of mixing consoles. Since our EURORACKs had already set new standards world-wide, I knew the development objectives behind the products bearing my initials had to be especially ambitious.

Thus, the concept and design of the new UB mixing consoles bear my signature. The design work, the entire circuit diagram and PCB development, and even the mechanical concepts are my own work. I carefully selected each individual component— with the aim of pushing the mixing consoles’ analog and digital technologies to their limits.

My vision was to enable you, the user, to give free rein to your true potential and creativity. The result is incredibly powerful mixing consoles that offer intuitive operation. They cannot fail to impress with their extremely flexible routing possibilities plus fantastic wealth of functions. Innovative technologies, such as the completely new IMP “Invisible” Mic Preamps, guarantee optimum sound quality and extraordinarily high-quality components provide unrivalled reliability, even under extreme loads.

Your new UB mixing console is of high quality yet is simple to use; you’ll soon appreciate that I, both personally and in my capacity as musician and sound engineer, put you, the end user, first and that these products were only possible because of the passion and the attention to detail that went into them.

Thank you for the confidence you have placed in us by purchasing the UB mixing console. I would also like to thank all those who, with their personal commitment and passion, have helped me realize this impressive series of mixing consoles.

Kindest regards,

Uli Behringer

TABLE OF CONTENTS

1. INTRODUCTION

3

1.1

General mixing console functions

4

1.2

The user’s manual

4

1.3

Before you get started

4

 

1.3.1

Shipment

4

 

1.3.2

Initial operation

4

 

1.3.3

Online registration

5

2. CONTROL ELEMENTS AND CONNECTORS

5

2.1

Mono channels

5

2.2

Stereo channels

6

2.3

Connector array of the main section

6

2.4

Main section

7

2.5

Digital effects processor

8

3. APPLICATIONS

8

3.1

Recording studio

8

3.2

Live sound

9

4. INSTALLATION

10

4.1

Mains connection

10

4.2

Audio connections

10

5. SPECIFICATIONS

11

6. WARRANTY

12

1. INTRODUCTION

Congratulations! In purchasing our EURORACK UB1002FX/ UB1202FX you have acquired a mixing console whose small size belies its incredible versatility and audio performance.

The BEHRINGER EURORACK mixing console offers you premium-quality microphone preamplifiers with optional phantom power supply, balanced line inputs and the ability to connect external effects processors. Because of its extensive and carefully thought-out routing possibilities, your EURORACK lends itself equally to both live and studio use.

IMP “INVISIBLE” MIC PREAMP

The microphone channels are fitted with BEHRINGER’s premium quality IMP INVISIBLE MIC PREAMPs that boast the following features:

s130 dB dynamic range for an incredible amount of headroom

sA bandwidth ranging from below 10 Hz to over 200 kHz for crystal-clear reproduction of even the finest nuances

sThe extremely low-noise and distortion-free circuitry gua- rantees absolutely natural and transparent signal repro- duction

sThey are perfectly matched to every conceivable micro- phone with up to 60 dB gain and +48 volt phantom power supply

sThey enable full utilization of the greatly extended dynamic range of your 24-bit/192 kHz HD recorder, thereby main- taining optimal audio quality.

MULTI-EFFECTS PROCESSOR

In addition, the UB1002FX/UB1202FX offers an effects processor equipped with 24-bit A/D and D/A converters. The FX processor puts at your disposal 100 presets with first-class room simulations, delay and modulation effects, and many multi- effects in outstanding audio quality.

3

Page 3
Image 3
Behringer UB1002FX, UB1202FX manual Foreword, Table of Contents, Introduction

UB1202FX, UB1002FX specifications

Behringer is well-known for producing budget-friendly yet powerful audio equipment, and their UB1002FX and UB1202FX mixers are prime examples of this commitment. Both models cater to musicians, podcasters, and sound engineers looking for compact solutions without compromising on sound quality.

The Behringer UB1002FX is a versatile 10-input mixer equipped with built-in effects. It features two low-noise, high-headroom mic preamps augmenting the audio quality for vocal and instrumental applications. With three-band EQ on each channel, users can sculpt their sound easily, while a 24-bit digital FX processor offers 100 studio-grade effects, including reverb, delay, and chorus, allowing for creative sound experimentation.

This mixer is designed with practical connectivity in mind. It includes stereo inputs, a dedicated tape input and output, as well as auxiliary sends per channel, ideal for routing to external effects devices or monitors. The UB1002FX also boasts a headphone output with a separate level control, providing a useful monitoring option during live performances or recording sessions.

The UB1202FX is a step up, offering 12 inputs and additional features that enhance its functionality. Like the UB1002FX, it features low-noise mic preamps and three-band EQ, but it also includes an advanced four-channel stereo input capability that allows for diverse input sources.

One of the standout features of the UB1202FX is its built-in DSP effects processor, which offers a rich palette of effects meant to cater to a variety of musical styles and applications. The total number of effects onboard allows for a greater scope of creative possibilities during both live performances and studio sessions.

Both mixers are designed with rugged construction, making them reliable even under demanding conditions and frequent use. The user-friendly layout ensures that navigating through channels and effects is intuitive, making it suitable for beginners and experienced engineers alike.

In terms of connectivity, both models feature balanced XLR outputs, enabling professional-grade connections to PA systems or recording interfaces. The compact size of the UB1002FX and UB1202FX makes them ideal for mobile setups or smaller venues, providing portability alongside robust performance.

Overall, the Behringer UB1002FX and UB1202FX mixers offer exceptional value for their price, with features and sound quality that present a compelling option for anyone in need of a reliable audio mixing solution.