EURORACK UB1002FX/UB1202FX
2.5 Digital effects processor
Fig. 2.5: Effects section
100
The EURORACK UB1002FX/UB1202FX features a
SIGNAL and CLIP LED
The SIGNAL LED on the effects module shows the presence of a signal whose level is high enough. This LED should always be on. However, make sure that the CLIP LED lights up only sporadically. If it is lit constantly, you are overdriving the effects processor, which leads to unpleasant distortion. If this occurs, turn the FX controls down somewhat.
PROGRAM
The PROGRAM control has two functions: by turning the PROGRAM control, you dial the number of an effect. The number of the preset you just dialed up blinks in the display. To confirm your selection, press the PROGRAM control; the blinking stops.
FX TO MAIN
The FX TO MAIN control feeds the effects signal into the main mix. If the control is turned all the way counterclockwise, no effects signal is present in the sum signal of the mixing console.
The appendix contains an overview of all presets of the multi effects processor.
3.APPLICATIONS
3.1Recording studio
Fig. 3.1: The UB1002FX in a recording studio
8 | 3. APPLICATIONS |