11X32 DIGITAL MIXER Preliminary User Manual

LeOnde.mp3

 

 

13:44:43

 

 

 

 

 

MyProj.prj

 

 

 

 

 

 

 

 

 

 

00.05.00

00.00.00

 

29 November 2010

 

 

 

Scene01

home

con￿g

 

gate

dyn

eq

sends

main

 

 

clip

Bus Con￿guration

 

Bus Insert Position

 

 

 

Channel Sends

∑

 

 

 

 

 

 

 

 

 

-6

 

 

 

 

 

 

 

 

 

 

-12

 

 

 

 

 

 

 

 

 

 

 

 

 

-18

 

 

 

 

 

 

 

 

 

 

 

 

 

Link

Pre

Insert

Post

 

 

-24

 

 

-30

All Channel Sends

 

 

 

 

Insert

 

 

-36

 

 

 

 

 

 

 

 

 

 

 

-42

Pre Con￿guration

 

 

 

Ins 01

 

 

 

-48

 

...

 

 

 

 

Ins 02

 

 

 

 

 

 

 

 

-54

 

Inputs

 

 

 

 

Ins 03

 

 

 

 

Pre EQ

 

 

 

 

Ins 04

 

 

 

 

 

 

 

 

 

 

Pre Fader

 

 

 

 

...

 

 

 

 

 

 

 

Post Fader

 

 

 

 

FX 01

 

 

 

 

 

Sub Grou

 

 

 

 

FX 02

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gain

Send Pos.

Insert Pos.

Insert

00.00 dB

Inputs

Pre

 

Link

Bus Sends

Insert

Connect

The configuration of Mix Bus Channels 1-16can be pre-set (in the Setup/Global page) or can also be configured on an individual, per-channel basis. The bus processing includes (in this order):

•Insert point (swappable between post-EQ and pre-EQ operation)

•6-band fully parametric EQ

•Compressor/expander (swappable between post-EQ and pre-EQ operation)

•Bus sends to 6 matrices (post-fader)

•Main LR panning

•Mono/Center level

Main Bus Channels LR/C are always available and independent from Mix Buses. The processing steps for this signal path include (in this order):

•Insert point (swappable between post-EQ and pre-EQ operation)

•6-band fully parametric EQ

•Compressor/expander (swappable between post-EQ and pre-EQ operation)

•Bus sends to 6 matrices (post-fader)

Matrix Channels 1-6are fed exclusively by MAIN LRC and Mix Bus 1-16 signals. The processing steps include (in this order):

•Insert point (swappable between post-EQ and pre-EQ operation)

•6-band fully parametric EQ

•Compressor/expander (swappable between post-EQ and pre-EQ operation)

Effects Processing 1-8

The X32 console contains eight true-stereo internal effects engines.

•FX 1-4 can be configured as side chain or insert effects, while FX 5-8 can only be used in insert points of channels or buses

•The returns of side chain FX 1-4 can always be controlled using the 3rd bank (layer) of the input channels - Aux/USB/FX Returns. Note that the return signals of FX 1-4 have separate faders for left and right

•The FX Home screen allows selection of the FX 1-4 input sources and selecting the effects type/algorithm for each of the 8 FX slots of the virtual rack

•The subsequent tabs FX 1-FX 8 of the FX screen allow editing all parameters of the chosen effects processor