33X32 DIGITAL MIXER Preliminary User Manual

6.XUF FireWire400/

USB Interface Operation Guide

Host system requirements for XUF FireWire/USB interface expansion card

Check the BEHRINGER website at behringer.com for updates of XUF firmware or system requirements. Please find the recommended hardware/software minimum configurations in the specifications section.

The BEHRINGER XUF High-Performance 32-Channel 24-Bit FireWire/USB Audio Interface

The XUF card provides 32 channel, bi-directional audio I/O via FireWire 400 and USB 2.0 to Mac or Windows PC. The simultaneous 32-in, 32-out audio channels enable extremely powerful studio and live applications. You can run virtual live sound checks or 32-track high-quality studio recordings, while at the same time remote operating your DAW via HUI/MackieControl emulation. The high speed 24-bit signal transmission and ultra-low latency ASIO drivers and CoreAudio compatibility even allow inserting audio plugins on your PC to perform advanced outboard processing.

FireWire/USB

After the console has fully booted up, you can access the Setup/Card screen to view the current channel count configuration. Use this screen to determine whether the FireWire or the USB interface is to be used, and if the maximum channel count is set appropriately.

6.1Configuring the XUF card for use in the console

The console will automatically detect the XUF card during the regular boot cycle, and it will display the card’s presence in several instances.

The green square in front of “C: XUF” indicates that the card is installed and working properly.