Hdcp HD Copy Protection, Full HD | Beko 40WLU550FHID guide

9.6-Connecting an external equipment via HDMI connection

Side view of TV

DVD

SATELLITE RECEIVER

GAME CONSOLE

HDMI: When a connection is made via HDMI socket, select the HDMI input you connected through from the Source menu and press the OK button to be able to display these pictures. Your TV will switch to the selected source.

Connect to the HDMI input at the back of your TV by using the connector located on your PC or your digital video-transmission device with a suitable cable (not supplied with the TV).

Note: To be able to watch an image in the HDMI mode, your computer must be equipped with a HDMI graphic card.

You may display the resolution information by pressing the INFO button.

9.6.1-HDCP (HD Copy Protection)

Your TV supports HDCP feature. If the HDMI source (HD DVD) is not compatible with HDCP standards it may result in no picture or sound.

NOTE:In HDMI mode; some resolutions are supported when a DVI to HDMI converter cable from a PC is used. Only 16:9, 4:3, 14:9 (some definitions) are supported as picture format.

Full HD

This TV is Full HD. This means that you can view high quality Full HD pictures via the HDMI socket or component input when using an HD source such as an HD DVD or SKY

HD BOX.

27

Image 29

Beko 40WLU550FHID manual Connecting an external equipment via Hdmi connection, Hdcp HD Copy Protection, Full HD

Contents

Operation Instructions Table of Contents Disposing of your TV at the end of service life Cleaning the screen and cabinetSuperior features of your integrated digital television Important Information Changing the plug Special Features Features of your new television Power connections Important Safety InstructionsPlease observe Please consider all warnings Cause permanent loss of hearing Never operate yourFire Batteries. There is the risk of explosion Initial power on and performing settings Aerial connection Powering on your TV and the initial useStart Batteries Rear and Side External Connections Your new televisionTV Control Panel Digital Mode Only Remote Control TV controls Performing the initial power-on settings Performing Digital Tunings Turning on the TV and Setting the ChannelsAutomatic Tuning of Channels and Storing in the Memory Or finish the searching process by pressing the Menu button Press Menu Select Setup Manual tuning of channels and storing in the memoryFirst Time Installation Program Table FAV button on your remote controlCreating favorite channels list Electronic TV Guide EPG Language Settings Digital FeaturesAccess Control Select Subtitling Language Performing Analog Tunings If you do not know the channel number Fine TuningWould like to have the channel stored. If Simply press the Exit button Deleting a stored channel Switching the locations of the stored channelsSkipping a stored channel To name the channels Sound Menu Settings Settings of Your New Television Picture Menu Settings Mpeg NR BacklightPicture Smart Picture Format Features Menu Settings Other Picture Features Teletext Question Answer Button Reveal Temporary TV Picture UpdateClock Fastext Headphone Connection Connecting an external equipment via Scart connectionExternal Equipment Connections AV To watch the picture of the broadcast Device connected using the Phono input, selectConnecting external equipment via Ypbpr connection Full HD Connecting an external equipment via Hdmi connectionHdcp HD Copy Protection PC Setting Switching to the PC modePC VGA connection PC Connection To Insert a CI Card How To Connect CI Common Interface Card Help and tips Failure Possible cause Solution General technical specifications Technical specifications chart Main UK Transmitter Stations What is covered? Guarantee Television HOW to Obtain Service Y1A.801