•Loosen the 3 screws of the lower door hinges using a screwdriver. (Do not remove completely)

•If the freezer compartment door is higher than the fridge compartment door, bring them to the same level by turning the elevation screw on the fridge compartment side in the direction of arrow using a M6 allen key as illustrated below:

allen key

•If the freezer compartment door is lower than the fridge compartment door, bring them to the same level by turning the elevation screw on the freezer compartment side in the direction of arrow using a M6 allen key in the similar way as explain above on the opposite side.

After doing the above adjustments, the doors should be level. If the doors do not close properly, this might adversely affect the operation and efficiency of the refrigerator.

6

STARTING

Final Check

Before you start using the fridge/freezer check that:

1.The feet have been adjusted so that the product is level.

2.The interior is dry and air can circulate freely at the rear of the cabinet.

3.Clean the interior as recommended under "CLEANING AND CARE."

4.Insert the plug into the wall socket and switch on the electricity supply.

•When the door is open the fridge interior light will come on.

5.You will hear a noise as the compressor starts up. The liquid and gases sealed within the refrigeration system may also give rise to noise, whether the compressor is running or not which is quite normal.

“Due to operation of the fan inside the frost free freezer compartment, overall noise level is slightly higher in comparison to non-frost free appliances. This is quite normal and is not a fault.”

6.Front edges of the cabinet may feel warm. This is normal. These areas are designed to be warm to avoid condensation.

7."Do not load the appliance immediately it is switched on. Wait until the correct storage temperature has been reached. (See page 20)

8.When the freezer reaches the desired temperature the freezer fan will stop. When the freezer fan is on, the noise will be louder when the freezer door is opened.

9.Avoid spillage of food particularly small items like rice, peas, beans through the fan guard and air flow vents as they may cause the cooling system to block and therefore operate less efficiently.

10.The factory set temperature is +4°C for fridge compartment and -18°C for freezer compartment.

11.The compressor will start running approximately 5 minutes after the refrigerator is plugged in to protect the electronic components of your appliance. After start up of the compressor, compartment temperatures will reach the set temperatures in 24 hours depending on the ambient temperature and load in your refrigerator.

12.Pay attention to the following points during the first 24 hours of the operation:

-Do not open the doors frequently.

-Do not overload your refrigerator.

-Do not put hot food.

7

Page 4 Page 6
Page 5
Image 5
Beko AB920, AB910 manual Starting
Page 4 Page 6

AB920, AB910 specifications

Beko AB910 and AB920 are innovative appliances designed to elevate home comfort and convenience. These models epitomize efficiency and cutting-edge technology, making them ideal for modern households.

The Beko AB910 stands out with its sleek design and advanced features. One of its main highlights is the Energy Efficiency class A++, which signifies lower energy consumption without compromising performance. It comes equipped with a powerful compressor that ensures consistent cooling, preserving the freshness of food for a longer duration. The AB910 features a large capacity, making it perfect for families or individuals who frequently buy groceries in bulk.

In terms of technology, the AB910 boasts a No Frost system, which eliminates the need for manual defrosting while maintaining optimal temperature levels. This ensures that food is stored without the risk of frost buildup. The appliance also incorporates a MultiZone feature, allowing users to adjust the temperature settings according to their specific needs, which is perfect for storing different types of food items.

The Beko AB920 builds on the success of the AB910, incorporating additional technologies and a more refined aesthetic. This model also comes with an Energy Efficiency class A rating, emphasizing its commitment to sustainability. One of the significant characteristics of the AB920 is its advanced cooling system, which utilizes NeoFrost technology to provide an even and stable temperature across the entire storage area. This helps in preventing food from spoiling quickly and maintains the nutritional value of stored items.

Another compelling feature of the AB920 is the HarvestFresh technology, which simulates natural sunlight within the fridge to preserve the vitamins in fruits and vegetables for up to 30% longer. This innovation is particularly beneficial for health-conscious consumers looking to maintain a balanced diet.

Both models include smart control options, allowing users to monitor and adjust settings remotely via a dedicated app. This capability adds a level of convenience, enabling users to manage their food storage efficiently even when they are away from home.

Beko AB910 and AB920 are designed with durability and user-friendliness in mind, featuring adjustable shelves and easy-to-clean interiors that increase usability. With their combination of efficient performance, innovative technologies, and stylish designs, these refrigerators represent a significant upgrade for any kitchen.
Top Page Image Contents