Installation
3.6. Door open warning
(This feature is optional)
An audio warning signal will be given when the door of your product is left open for 1 minute. This warning will be muted when the door is closed or any of the display buttons (if any) are pressed.
3.7. Water connection
ASP341 models only
(This feature is optional)
Water system installation of the refrigerator must be performed by a competent person.
Depending on the model of the refrigerator, you may not have to connect to water main.First you must connect the water hose to the refrigerator.
Check that following parts have been delivered together with the product:
1.Union for connecting the water hose to the rear of the refrigerator
2.3 pieces of pipe clips (used to secure the water hose)
3.
4.(4) Cold mains water valve with mesh filter (tap adapter)
5.(5) External water filter.
1 | 2 |
3.8.Connecting the water hose to the refrigerator
1.Slip the union (b) onto the water hose (a).
2.Push the water hose downwards firmly to slip it onto the water inlet valve (c).
3.Tighten the union (c) by hand to secure it onto the water inlet valve.
a |
a |
b |
2 |
1 |
c |
C Normally, you are not required to tighten the union with a tool. However, you can use a spanner or pliers to tighten the union if there is a leakage.
3 | 4 | *5 |
Refrigerator / User Manual
9 / 30 EN
