Installation
•Do not consume the first 30 pieces
•First several glasses of water may be cloudy when the filter is used for the first time. Therefore, do not consume the first several glasses of water.
•If the water dispenser is not used for a long period of time, first
•If a power outage or a temporary failure occurs while the refrigerator is operating, ice can melt down a little bit and then get frozen again. In such a case, ice cubes can stick to each other. If the outage or failure prolongs, ice can melt down causing water leakage. If you experience such a problem, empty and clean the ice container.
•Ice cubes can stick to each other if they are left in the container for a long time.
•If the product is to be connected to the water mains, make sure that you use potable water.
•Water system of the product is designed to operate only with water. Do not use beverage such as soft drinks and/or juices in the water system.
•It is recommended that the water is disconnected if you will not be using the refrigerator for a long period of time due to vacation or similar reasons.
•Do not attempt to dismantle the ice container group assembly parts.
•Do not attempt to clean the ice container assembly without removing it from the refrigerator.
3.14.Transportation of the product
1.Unplug the product before transporting it.
2.Remove water connections.
3.Secure the shelves, accessories, crisper and etc. in the refrigerator by adhesive tape before repackaging it.
C Packaging must be adequate and the rules of transportation printed on the package must be followed.
C Original packaging and foam materials should be kept for future transportations.
AWARNING: Packaging materials are dangerous for the children. Keep packaging materials in a safe place away from reach of the children.
Refrigerator / User Manual
