4Preparation
4.1. Things to be done for energy saving
A
• Do not leave the doors of your refrigerator open for a long time.
• Do not put hot food or drinks in your refrigerator.
• Do not overload the refrigerator. Cooling capacity will fall when the air circulation inside is hindered.
• Do not place the refrigerator in places subject to direct sunlight. Install the product at least 30 cm away from heat sources such as hobs, ovens, heater cores.
• Store your food in refrigerator in closed containers.
• Thawing frozen food in fridge compartment will both provide energy saving and preserve the food quality.
C
C
C
4.2. Efficient operation
Specified energy consumption value of your refrigerator is determined under maximum load by removing the freezer compartment upper rack and while other racks and two bottom drawers are in place. there is no harm to remove a shelf or drawer to accommodate the shapes and size of food to be frozen.
4.3.Recommendations on the fridge compartment
•Do not allow the food to touch the temperature sensor in fridge compartment. To allow the fridge compartment to keep its ideal storage temperature, sensor must not be hindered by food.
•Do not put hot food and beverages inside the product.
4.4. Initial use
Before starting to use the product, check that all preparations are made in accordance with the instructions in sections "Important instructions for safety and environment" and "Installation".
•Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning” section. Check that inside of it is dry before operating it.
•Plug the refrigerator into the grounded wall outlet. When the door is opened the interior illumination will turn on.
14 / 30 EN
