Beko D-9330 NM How to use the accessories, Replacing the interior light bulb, Making ice cubes

GB Instruction Manual

How to use the accessories

Crisper humidity controls

This has been designed to keep your vegetables fresh, without losing moisture (Fig. 8).

For this purpose, cold air circulates around the crisper. The amount of cold air passing out of

the crisper can be regulated with the controls found on the front of its cover. You may set the humidity-control knob to the position appropriate to the degree of moisture and coldness of the foodstuffs inside. If you want these to cool further, set the control to “Open”, if you want them to cool less but retain their moisture for a long period, set it to “Closed”. Positions in between allow you to regulate cooling and moisture-retention as you desire.

Replacing the interior light bulb

Warning!

Light bulb must be changed by on authorized service personnel.

Should the light fail, switch off at the socket outlet and pull out the mains plug.

Then ensure the bulb is screwed securely in the bulb holder. Replace the plug and switch on.

If the light still fails, obtain a replacement E14 screw-cap type 15 Watt (Max) bulb from your local electrical store and then fit it .Carefully dispose of the burnt-out light bulb immediately.

Making ice cubes

(Fig. 9)

Fill the ice - cube tray 3/4 full with water and place it in the freezer inside it’s special location.

6