Beko D2 7101E Starting the program, Progress of program, Time delay, Changing the delay time

Time delay

With the “Time delay” function you can delay the program start up to 24 hours. Setting can be made in intervals of 30 minutes.

1.Open the loading door, place the laundry inside and fill with detergent.

2.Set the washing program, temperature, spin speed and, if required, select the auxiliary functions.

3.Press “Time delaying” buttons “+” and “-” (Figure 2-6) to set your desired time delay. Time delaying symbol (Figure 3-2h) will flash.

4.Press “Start/Pause/Cancel” button (Figure 2-8). Then the time delay starts to count down. Time delaying symbol (Figure 3-2h) will light up. Start symbol (Figure 3-2j) will light up.

The “:” in the middle of the displayed time delay will start flashing.

•More laundry may be loaded or taken out during the time delay period. At the end of the time delay countdown process, time delaying symbol (Figure 3-2h) fades and the washing starts as the program duration is displayed.

Changing the delay time

If you want to change the time during the countdown:

1.Press “Start/Pause/Cancel” button (Figure 2-8). “:” in the middle of the screen will stop flashing. Standby symbol (Figure 3-2k) will light up. Time delaying symbol (Figure 3-2h) will flash. Start Symbol (Figure 3-2j) will fade.

2.Press “Time delaying” buttons “+” and “-” (Figure 2-6) to set your desired time delay.

3.Press “Start/Pause/Cancel” button. Time delaying symbol (Figure 3-2h) will light up. Standby symbol (Figure 3-2k) will fade. Start symbol (Figure 3-2j) will light up.

4.The “:” in the middle of the displayed time delay will start flashing.

Canceling the time delay

If you want to cancel the time delay countdown and start the program immediately:

1.Press “Start/Pause/Cancel” button (Figure 2-8). The “:” in the middle of the displayed time delay will stop flashing.

2.Start symbol (Figure 3-2j) will fade. The standby symbol (Figure 3-2k) and the time delaying symbol (Figure 3-2h) will flash.

3.Press time delaying button “-” (Figure 2-6) to decrease the desired time delay. Program duration after

30 minutes shall be displayed.

4.Press “Start/Pause/Cancel Button” to start the program.

Starting the program

1.Press “Start/Pause/Cancel” button (Figure 2-8) to start the program.

2.The start symbol (Figure 3-2j) which indicates that the program has started will light up.

3.The door locks and the door locked symbol (Figure 3-2i) will light up.

4.Symbol of the relevant step

(prewash, main wash, rinse, softener and spin) that the program has started from will light up (Figure 3-2f).

Progress of program.

The progress of a running program is shown through a number of symbols on the screen.

•At the beginning of each program step, the relevant symbol in the series of symbols will light up and thus, at the end of the program, all symbols will remain lit up. The symbol that is lit up at the far right of the series of symbols indicates the step that is being carried out.

Prewash

When “Prewash” auxiliary function is selected, prewash symbol will light up to indicate the beginning of prewash step.

20

TR