TR
22
on the screen whenever any button
is pressed while the machine is child-
locked.
To deactivate the child-proof lock,
press the 2nd and 4th auxiliary function
buttons for 3 sec.
“C:OFF”(Childlockisdeactivated)label
appears on the screen.
Ending the program through canceling
“Start/Pause/Cancel”button(Figure
2-8)ispressedfor3secondstocancel
theprogram.Startsymbol(Figure
3-2j)willflashduringcancellation.
After cancellation, the symbol of the
corresponding step at which the
cancellation was made will remain lit and
“End”labelwillappearonthescreen.
Program in rinse hold mode
• This process is shown with the
flashingSpinSymbol(Figure3-2c)
and the lit up Standby Symbol
(Figure3-2k).
If you wish to spin when the machine is
inthismode:
Adjustthespinspeed.Press“Start/
Pause/Cancel”button(Figure2-8).
The program continues, pumps out
the water and spins. Standby Symbol
(Figure3-2k)fadesoutandStartSymbol
(Figure3-2j)lightsup.
If you want to discharge the water only
withoutspinning:
Press“Start/Pause/Cancel”button
(Figure2-8).Standbysymbol(Figure
3-2k)willfade.Startsymbol(Figure3-2j)
will light up. The program continues and
only pumps out the water.
End of program
When the program is finished, the
symbols of the relevant steps will remain
lit up and the auxiliary function, spin and
temperature data selected at the start-
up of the program will remain selected.
“End”labelwillappearonthescreen.