Ringing tones
Wherever you require your calls to arrive discreetly, you can use the vibrator or select the silent mode.
Silent mode is automatically deactivated when the hands free car kit is connected as well as when the phone is switched on/off.
You can select the tones produced by your keypad: Beep, DTMF (musical keys) or non active tones (in this last case, when you press your keyboard, it does not make a noise).
Setting the vibrator (depending on model)
Using the scrolling keys, select one of the following options: inactive vibrate, only vibrate, vibrate and ring, vibrate then ring.
Validate by pressing the righthand key 
.
Selecting silent mode (depending on model)
If you want the ringing tone of your phone to be replaced by the vibrator and the beeps to be suppressed (except for the alarm tone), tick the box and validate by pressing OK.
You can also activate/deactivate the silent mode by holding down the ∗ 
key.
This mode is indicated by the symbol 
on the screen.
Setting the beeps
Different controls are available:
Setting the keypad tones
Select the tone required using the scrolling arrows and validate (press the righthand key 
).
Setting the network tone
If you want your phone to give a warning beep when it locates a network on which it can communicate:
Tick the box and validate by pressing OK.
45
23/09/2003, 16:30
