Beko DCY 8502 XB1 user manual Starting the programme, Progress of programme, Child Lock

Operating the product

		Changing the End time
		If you want to change the time during countdown:
		1.	Press On/Off/Cancel button for 3 seconds to can-
			cel the programme. Restart the machine and repeat
Cleaning the condenser			the Delay Setting procedure for the desired time.
		2.	When your machine is operated for the first time,
Warning symbol flashes with certain intervals to remind
			it starts with the declaration programme (wardrobe
that the condenser needs to be cleaned.
			dryness for cottons.
		Cancelling the end time
		If you want to cancel the End time countdown and start
		the programme immediately:
		1.	Press On/Off/Cancel button for 3 seconds to can-
Loading door open		2.	cel the programme.
This warning symbol Pause appears and programme			Press On/Off/Cancel button to start the pro-
			gramme you have previously selected.
progress symbol flashes when the loading door of the
		5.10 Starting the programme
dryer is open.
		Press the Start/Pause button to start the program.
		Start symbol will light up to indicate that the pro-
		gramme has started and ":" symbol in the middle of the
		remaining time will keep flashing. Progress of Programme
		Symbol flashes on the screen.
		5.11.Progress of programme
End time
With the End Time function, the end time of the pro-
gramme may be delayed up to 24 hours.
1.	Open the loading door and put the laundry in.
2.	Select the drying programme, spin speed and, if
	required, the auxiliary functions.
3.	Press End time button to set the desired time delay.
	End time symbol flashes on the display. (When the	5.12 Child Lock
	button is pressed on, End time proceeds continu-
	ously)	Machine is equipped with a Childproof Lock which
4. Press Start / Pause button. End time starts count-		prevents interfering with the current programme flow
	down and Start symbol lights up on the display. The	by pressing any button. All buttons except the On/Off/
	“:” in the middle of the displayed delay time flashes.
		Cancel button on the control panel are deactivated when
		the Child-proof Lock is active.
		In order to activate the Childproof Lock, press Anti-
		creasing button for 3 seconds.
		To start a new programme after the current programme
		is over or to interrupt the current programme, the Child-
		proof Lock should be deactivated. Press the same button
		for 3 seconds again to deactivate the Child-proof
		Lock.
	Additional laundry may be loaded / taken		Lock symbol will appear on the display
	out during the End time. At the end of
		C when the Child-proof Lock is activated.
C the countdown process, end time symbol
	disappears, drying process starts and the
	programme duration is displayed. The
	time on the display is the total of normal
	drying time and end time.
Dryer / User Manual			21 / 28 EN