6Maintenance and cleaning
Service life of product extends and frequently experi- enced problems will be reduced if it is cleaned at regular intervals.
6.1Cleaning Lint Filter / Loading Door Inner Surface
Lint and fiber released from the laundry to the air during the drying cycle are collected in the Lint Filter.
C Such fiber and lint are generally formed during wearing and washing.
A Always clean the lint filter and the inner surfaces of the loading door after each drying process.
C You can clean the lint filter housing with a vacuum cleaner.
To clean the lint filter:
•Open the loading door.
•Remove the lint filter by pulling it up and open the lint filter.
•Clean lint, fiber, and cotton raveling by hand or with a soft piece of cloth.
•Close the lint filter and place it back into its housing.
•Clean the entire inner surface of the loading door and loading door gasket with a soft damp cloth.
•A layer can build up on the filter pores that can cause clogging of the filter after using the dryer for a while. Wash the lint filter with warm water to remove the layer that builds up on the lint filter surface. Dry the lint filter completely before reinstalling it.
6.2 Cleaning the sensor
There are dampness sensors in the dryer that detect whether the laundry is dry or not.
To clean the sensors:
•Open the loading doorof the dryer.
•Allow the machine to cool down if it is still hot due to the drying process.
•Wipe the metal surfaces of the sensor with a soft cloth, dampened with vinegar and dry them.
C Clean metal surfaces of the sensors 4 times a year.
Dryer / User Manual | 23 / 28 EN |
|
|
