Maintenance and cleaning
C Do not use metal tools when cleaning metal surfaces of the sensors.
A Never use solvents, cleaning agents or similar substances for cleaning due to the risk of fire and explosion!
• Drain the water in the tank.
6.3 Draining the water tank
Dampness of the laundry is removed and condensed dur- ing drying process and the water that arise accumulates in the water tank. Drain the water tank after each drying cycle.
A Condensed water is not drinkable!
A Never remove the water tank when the program is running!
If you forget to drain the water tank, the machine will stop during the subsequent drying cycles when the water tank is full and the Water Tank warning symbol will flash. If this is the case, drain the water tank and press Start / Pause button to resume the drying cycle.
To drain the water tank:
Pull the drawer and remove the water tank carefully.
• If there is lint accumulation in the funnel of the water tank, clean it under running water.
•CPlace the water tank into its seat.
24 / 28 EN | Dryer / User Manual |
| |
|
|
