Installation
4.Attach the connector into the faucet adaptor and tighten by hand / tool.
5.To avoid damaging, shifting or accidentally disconnecting the hose, use the clips provided to fix the water hose appropriately.
AWARNING: After turning the faucet on, make sure there is no water leak on either end of the water hose. In case of leakage, turn the valve off and tighten all connections using a pipe wrench or pliers.
3.8. For products using water carboy
(Optional)
To use a carboy for the product’s water connection, the water pump recommended by the authorized service must be used.
1.Connect one end of the water hose provided with the pump to the product (see 3.6) and follow the instructions below.
2.Connect the other end of the water hose to the water pump by pushing the hose into the pump’s hose inlet.
3.Place and fasten the pump hose inside the carboy.
4.Once the connection is established, plug in and start the water pump.
C Please wait
C See also the pump’s user guide for water connection.
C When using carboy, water filter is not required.
|
|
|
|
|
|
|
|
|
| 10 / 24 EN | Refrigerator / User Guide |
|
|
|
|
