Installation
3.3. Adjusting the stands
If the product is not in balanced position, adjust the front adjustable stands by rotating right or left.
3.5. Water connection
(Optional)
AWARNING: Unplug the product and the water pump (if available) during connection.
The product’s water mains, filter and carboy connections must be rendered by authorizer service. The product can be connected to a carboy or directly to the water mains, depending on the model. To establish the connection, the water hose must first be connected to the product.
Check to see the following parts are supplied with your product’s model:
3.4. Power connection
AWARNING: Do not use extension or multi
sockets in power connection.
BWARNING: Damaged power cable must be replaced by Authorized Service.
C When placing two coolers in adjacent position, leave at least 4 cm distance between the two units.
•Our firm will not assume responsibility for any damages due to usage without earthing and power connection in compliance with national regulations.
•The power cable plug must be easily accessible after installation.
•Connect the refrigerator to an earthed socket with
•Do not use
1 | 2 |
|
3 | 4 | *5 |
1.Connector (1 piece): Used to attach the water hose to the rear of the product.
2.Hose clip (3 pieces): Used to fix the water hose on the wall.
3.Water hose (1 piece, 5 meter diameter 1/4 inches): Used for the water connection.
4.Faucet adapter (1 piece): Comprises a porous filter, used for connection to the cold water mains.
5.Water filter (1 piece *Optional): Used to connect the mains water to the product. Water filter is not required if carboy connection is available.
| 8 / 24 EN | Refrigerator / User Guide |
|
|
|
