Beko GNE134750X manual Taking ice / water, Activating the water filter replacing alert

Using the product

5.2.Activating the water filter replacing alert

(For products connected to water mains and comprising filter)

The water filter replacing alert is adjusted as described below.

1.Press the A (button lock) button while the

5.3. Taking ice / water

(Optional)

Select the related option using the display to take water ( ) / cube ice ( ) / crushed ice (). Water/ice can be taken pushing the trigger on the water fountain. When transition is made between cube ice ( ) / crushed ice ( ) options, the ice type from the previous selection can be given in the first few times.

A

refrigerator is running.

2.Then press the following buttons in order.

4 3 2 1

1.Vacation button

2.Cooler temperature adjustment button

3.Rapid cool adjustment button

4.Freezer temperature adjustment button

When the buttons are pressed in the correct order, the button lock indicator turns off, a short sound warning is heard and Filter Change Warning indicator turns on.

The filter service life automatic calculation function is inactive by default. This function must be activated for products comprising a filter.

Your refrigerator will automatically indicate the filter replacement period after 6 months. Repeating this process when the filter service life automatic calculation is active will cancel this function.

•You must wait approximately 12 hours before taking ice from the ice / water fountain for the first time. The fountain may not discharge ice if there is insufficient ice in the ice box.

•The 30 pieces of ice cubes (3-4 Litres) taken after first operating should not be used.

•In case of power blackout or temporary malfunction, the ice may partly melt and re- freeze. This will cause the ice pieces to merge with each other. In case of extended power blackouts or malfunction, the ice may melt and leak out. If such a problem occurs, clean the ice tray by removing the ice remaining in the ice tray (see 6.3. )

AWARNING: The product’s water system should be connected to cold water line only. Do not connect to hot water line.

•Water may not be taken in when the product is run for the first time. The reason for this is the air inside the system. The air in the system must be discharged. To do this, push the water fountain trigger for 1-2 minutes until the fountain discharges water. The initial water flow may be irregular. The water will flow normally once the air in the system is discharged.

16 / 24 EN Refrigerator / User Guide