Connection of Water Hose to the Bottle
(in some models)
To connect water to the refrigerator from a bottle, a pump is needed. Follow the instructions below after connecting one end of the water pipe coming out of the pump to the refrigerator as described on the previous page.
1.Finish the connection by pushing the other end of the water pipe into the water pipe inlet of the pump as shown in the figure.
2.Put and fix the pump hose into the bottle as shown in the figure.
3.After completing the connection, plug in and run the pump.
To provide an efficient operation of the pump, wait for
C You may refer to the user manual of the pump while making the water connection.
C There is no need to use water filter in case a bottle is used.
C Pump must be used when bottle will be used.
1a |
1b
2
12
EN
