Beko GNE 134620 X manual 1 3 4, Egg tray, Sliding Body Shelves, Crisper, C compartment

Models: GNE 134620 X

1 32
Download 32 pages 53.32 Kb
Page 23
Image 23
Egg tray

Egg tray

You can install the egg holder to the desired door or body shelf.

Never store the egg holder in the freezer compartment

Sliding Body Shelves

Sliding body shelves can be pulled by slightly lifting up from the front and moved back and forth. They come to a stop point when pulled towards front to allow you reach the foods placed at the back of the shelf; when it is pulled after slightly lifted upwards at the second stop point, the body shelf will be released.

The shelf should be hold tightly from the bottom as well in order to prevent it from tipping over. The body shelf is placed on the rails at the sides of the refrigerator body by bringing it to one lower or one upper level.

The body shelf should be pushed backwards to seat it completely.

Crisper

Crisper of your refrigerator is designed specially to keep your vegetables freshly without loosing their humidity. For this purpose, cool air circulation occurs around the crisper in general. Remove the door shelves that align with the crisper before removing the crispers. You can remove the crispers as illustrated in the figure.

0 °C compartment

0 °C compartments enable the foods to be frozen become ready for freezing. You can also use these compartments to store your food at a temperature a few degrees below the fridge compartment.

Sliding Body Shelves1 2Crisper

0 °C compartment3

4

You can increase the inner volume of your refrigerator by removing any of the 0 °C compartments. To do this, pull the compartment towards yourself; the compartment will lean against the stopper and stop. This compartment will be released when you lift it about 1 cm and pull it towards yourself.

22

EN

Page 23
Image 23
Beko GNE 134620 X manual 1 3 4, Egg tray, Sliding Body Shelves, Crisper, C compartment