17.Fit front top panel plastic hinge covers on the opposite sides. (16)
18.Remove the handle cover gently taking care not to damage the appliance.(17)
19.Unscrew and remove the handle (18). Do not unscrew the yellow coloured screws!
20.Rotate 180 degrees and fit handle to the other side after removing hole plugs gently.(19,20)
21.Fit the handle cover.(21)
22.Adjust the two front feet if necessary.
23.Check that door opens and closes easily, it is aligned correctly and there are no gaps allowing air into the cabinet. If there are gaps between the door seal and the cabinet, adjust the door seal by gently pulling away from the door using fingers.
24.Check that all the hinge screws are tightened. Avoid over tightening the screws.
25.Put all items, fittings back in the appliance.
26.Wait for at least 4 hours to allow the system to settle before switching on.
27.Once the correct storage temperatures have been reached in the appliance, put back all the food.
12
EN
