3Installation

Transportation Instructions

1.The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation.

2.If during the course of transport the appliance has to be transported horizontally, it must only be laid on its right hand side when standing in the frontof the appliance. After bringing it to upright position,it must not be operated for at least 4 hours to allow the system to settle.

3.Failure to comply with the

above instructions could result in damage occuring to the appliance. The manufacturer will not be held responsible if these instructions are disregarded.

4.The appliance must be protected against rain, moisture and other atmospheric influences.

5.Empty any water in the drain tray before moving see section “Defrosting” and “Cleaning & Care” for further information

IMPORTANT : Make sure the plastic evaporating pan at the back of the product collects water properly.

“IMPORTANT: Care must be taken while cleaning / carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of theappliance as you might injure your fingers and hands.

“IMPORTANT: This appliance is not designed for stacking with any otherappliance.When positioning your appliance, take care not to damage your flooring, pipes,wall coverings etc.

Do not move the appliance by pulling by the door or handle.Do not attempt to sit or stand on top of your appliance as it is not designed forsuch use. You could injure yourself or damage the appliance.

“IMPORTANT: Make sure that mains cable is not caught under the applianceduring and after carrying

/moving the appliance, to avoid the mains cablebecoming cut or damaged.”Do not allow children to play with the appliance or tamper with the controls.

BEKO declines to accept any liability should the instructions not be followed.

Installation Instructions

1.If possible avoid placing the appliance near cookers, radiators or in

direct sunlight as this will cause the compressor to run for long periods. If installed next to a source of heat or refrigerator, maintain the following minimum side clearances:

From Cookers 2” (50 mm) From Radiators 12” (300 mm)

From Refrigerators or Larder Fridge 1” (25 mm)

2.No gap is required at sides and top.

See item 3 below to ensure a gap is obtained at the rear of the appliance. If a gap is available on side and top, retain it if possible as it would improve the air circulation around the appliance.

3.Fit the two plastic wall spacers supplied with the appliance rotating 1/4 turn to the condenser at the back of the refrigerator (see diagram).

8

EN

Page 7 Page 9
Page 8
Image 8
Beko UR584APS, UR584APW manual Transportation Instructions, Installation Instructions
Page 7 Page 9

UR584APW, UR584APS specifications

The Beko UR584APS and UR584APW are two innovative undercounter refrigerators that blend modern functionality with stylish design. Both models are designed to meet the needs of contemporary households, providing valuable additional refrigeration space while optimizing energy efficiency.

One of the standout features of the Beko UR584APS and UR584APW is their spacious interiors. With a total storage capacity of around 140 liters, these models offer ample space for storing a variety of food items. The adjustable shelves allow users to customize the interior layout, accommodating taller bottles or larger containers with ease. This flexibility makes these refrigerators ideal for families, food enthusiasts, or anyone who values efficient organization.

Beko has always been at the forefront of energy efficiency, and the UR584APS and UR584APW are no exception. Both models boast an impressive energy rating, helping users save on their electricity bills while minimizing their carbon footprint. The incorporation of advanced cooling technologies ensures that temperatures are maintained consistently, preserving food freshness for longer periods.

A notable feature of both models is the Active Fresh Blue Light technology. This innovative technology helps to extend the shelf life of fruits and vegetables by replicating natural sunlight, thus preserving vitamins and nutritional value. Additionally, the provision of a special crisper drawer for fruits and vegetables ensures optimal humidity levels, keeping produce fresh and crisp.

The user-friendly control panel and reversible door design add to the convenience of these appliances. The control panel is easy to operate, allowing users to adjust the temperature settings effortlessly. The reversible door feature offers flexibility in positioning the refrigerator in any kitchen layout, making it easy to fit into any space without compromising accessibility.

Aesthetic appeal is another highlight of the Beko UR584APS and UR584APW. The stainless steel finish of the UR584APS gives it a modern and sleek look, perfect for more modern kitchens. In contrast, the UR584APW features a classic white exterior, suitable for traditional and contemporary settings alike. Both models are designed to be compact, allowing for easy integration into various kitchen designs without taking up excessive space.

In conclusion, the Beko UR584APS and UR584APW combine functionality, energy efficiency, and stylish design, making them excellent choices for anyone in need of additional refrigerated storage. With their innovative features and thoughtful design, these refrigerators cater to modern living while offering reliability and performance.
Top Page Image Contents