level in the machine is suitable. Laundry may be added or taken out by opening the door. If the “Lid” lamp does not light up continuously at the end of this time, the water level in the machine
is not suitable and laundry cannot be added. You can resume the program by pressing the “Start/Pause/Cancel” button again.
Child-proof lock
There is a childproof lock to prevent any program interruption because of pressing the keys while the program is on. In order to activate the childproof lock, press on the 1st and 2nd auxiliary function keys from the left simultaneously for 3 seconds after the washing program has started.
1st auxiliary function light will flash continuously.
To start a new program after the program is over or to interfere the program, childproof lock should be deactivated. To deactivate the child- proof lock, press the same buttons for 3 sec.
Ending the program through canceling
The program which is selected first will keep on going even if the position of the program selection button is changed. A new program can be selected or started after “Program is cancelled” in order to change the washing program.
To cancel any selected program;
•Press “Start/Pause/Cancel” button for 3 seconds. The machine starts to discharge the water. “Wash” and “Program Finished” lights will light up.
•“Start/Pause/Cancel” and “Wash” lights will go off after discharging process is over and the “Lid” light will start flashing.
•“Lid” lamp will light up continuously when the door is unlocked. You can select and start a new program.
•If the program is cancelled in the
middle of the process, “Wash” and “Program Finished” lights will light up. The machine can drain all the water or can take in water for 3 times at most to cool down the clothes and complete draining process.
•When the water discharging process is completed, the “Wash” light will go off, “Program Finished” light
will light up and the “Lid” light will continuously flash until the door is unlocked. You can make a new program selection when the “Lid” light is illuminated continuously.
End of Program
The “Program Finished” lamp on the program
If any key is pressed when the machine is at the end of the program or if
the position of the selection knob is changed, the “Program Finished” light will go off and only the “Lid” lamp will remain as lit. Meanwhile, if the door is still locked, the “Lid” light will continue flashing until the door is opened.
Press the “On/Off” button to shut down the machine.
20
EN
