Beko WM 5100 S manual

Models: WM 5100 S

1 32
Download 32 pages 36.61 Kb
Page 31
Image 31
You may not be using

 

You may not be using

 

 

proper detergent for

Use only automatic washing machine

 

automatic washing

detergents in your washing machine.

 

machines.

 

 

Excessive amount of

 

 

detergent may have been

Use only sufficient amount of detergent.

 

used.

 

 

Too much detergent

 

 

may have been used for

Use only sufficient amount of detergent.

 

a small amount of lightly

 

 

 

soiled laundry.

 

 

Detergent may have been

Store detergent in a closed and dry location. Do

 

stored improperly.

not store in excessively hot places.

There is too

Type of material being

 

much foam.

washed (lace items will

Use smaller amounts of detergent for lace

 

cause excessive foam due

items.

 

to their meshed structure).

 

 

Detergent might have

If you put detergent in the prewash

 

compartment although you have not selected

 

been put in the wrong

 

a prewash cycle, the machine can take this

 

compartment.

 

detergent during rinsing or softener step.

 

 

 

 

 

 

 

You may have added too much softener.

 

 

The detergent dispenser might be problematic.

 

Softener being released

Water may be siphoned (pulling the softener

 

early.

into the washer early) during the fill or rinse

 

 

cycles.

 

 

There might be problems with the valves.

 

 

 

 

The plug might not be

 

 

plugged in the mains

Plug should be checked.

Machine does

outlet.

 

Fuse may have blown.

Fuse should be checked.

work. No light

is on.

Electricity may be cut off.

Power should be checked.

 

The “On/Off” button might

This button must be pressed.

 

have not been pressed.

 

The machine

 

 

did not start

 

 

after the

 

 

program was

The front door may be

 

selected and

 

ajar.

 

the ‘Start/

 

 

 

Pause/Cancel’

 

 

button was

 

 

pressed.

 

 

“Washing”

 

 

and “Start/

 

 

Pause/Cancel”

Water may have been cut

You can restart your machine by pressing the

lights are

“Start/Pause/Cancel” button for a short time

flashing after

off.

after ensuring that the water is not cut off.

the program is

 

 

started.

 

 

 

It shows the safety period

For your safety, the front door can only

The “Lid” light

be opened 2 minutes after the program is

is flashing.

until the door lock is

completed. The “Lid” light will flash during this

opened.

 

period.

 

 

31

EN

Page 31
Image 31
Beko WM 5100 S manual